EZ-ALARM anti-lift module for car alarms.

EZ-ALARM Omni-directional Anti-Lift module for Car alarms

EZ-ALARM is a LOW COST advanced microprocessor controlled Omni-directional ANTI-LIFT module to be used on all types of Vehicle Security systems. In its EVALUATION form the EZ-ALARM is a 2"x2" module able to detect angular position deviations from previously remembered vehicle orientation. The module includes error detection algorithms to minimize false alarm activations which may occur due to snow, rain, temperature, sudden short shock, etc. The design complies with THATCHAM guidelines as stated in sections: Iss. 02, BV02 and AA02. Includes internal supply regulation and Low stand-by current. Output is a standard NPN transistor in an Open Collector configuration. The design includes 8 hardware selectable detection levels and a self detecting SERIAL communication port to PC through standard terminal mode at 600 to 19200 Baud rates. Alarm active time could be hardware selected between 2msec and 580 msec. The module could operate with DX-008D sensor for higher sesitivity in a +-20 arcdeg tilt range. The unit could be produced as a small potted module with 3 terminals to fit currently marketed alarms or to be incorporated into future designs.

SpecificationDataComments/units
Power5-18Vdc
Current0.9mA max in stand-by
OutputNPNOpen Collector
Alarm Current100mA
Tilt Range+-60arcdeg
Primary detect3arcdeg
Sensitivity0.02arcdeg
Alarm Signal500-580msec
Reactivation40sec, automatic
Connector3pins: Vcc,GND,OUT


Specifications may change without notice.


ADVANCED ORIENTATION SYSTEMS, Inc.
2525 BRUNSWICK AVE, Suite 205
LINDEN, NJ 07036, USA.
Phone: 908-474-9595
Fax: 908-474-9090
sales@aositilt.com
http://www.aositilt.com