EZ-5000-HG ULTRA HIGH RESOLUTION
Analog-Digital-PWM-Alarms Dual/Single Axis Tilt System
EZ-TILT-5000-HG, advanced programmable dual/single axis LINEAR Analog/Digital output tilt module, is built around a customized state of the art CMOS Microprocessor. A 2"x 2" assembled dual PCB assembly provides concurrent Analog, PWM and RS-232 inclination information in one/two axis of tilt. Each sensor probe is polished and calibrated to the bottom surface. Single axis system includes the signal conditioner and one probe. Dual axis systems consist of signal conditioner and two probes. Single axis system is shown on the photo.
The internal software includes full range linearity correction for each axis of tilt and two software adjustable threshold detectors, one for each axis. The module uses one/two horizontal ceramic sensor probes and provides an economical and reliable tilt sensing solution for applications requiring superior Nulling capabilities with concurrent excellent NEAR ZERO LINEARITY, resolution, repeatability and symmetry. Rugged construction and high temperature range make these sensor probes perfectly suitable for numerous high precision OEM, military, medical, optical, automotive, range finder, alignment, automation, robotics and construction angle measurement applications.
The EZ-TILT-5000-HG also includes two fully programmable level threshold detector lines that allow the user to set level sensitive alarms for pitch and roll. Both Analog and PWM outputs are fully software programmable and are updated each read cycle for each enabled axis. The analog output range is top limited by 4Vdc and bottom limited by 1Vdc for the full set angular range. The PWM will output 10% to 90% duty cycle for the set angular range at base frequency of 37Hz. Exceptionally stable and consistent performance and it's LOW cost make EZ-TILT-5000-HG the perfect choice for ULTRA high accuracy leveling applications. Test data could be supplied on CD or e-mailed upon special request. The module is able to operate in a stand-alone mode with a 4 line x 20 character serial LCD display.
| Specification | EZ-TILT-5000HG | Comments/Units |
|---|---|---|
| RS232 Output | -0.1 to +0.1 max | arcdeg |
Analog Output | -0.1 to +0.1 max | 1--4 Vdc p-p
total span adjustable |
| Analog Output span | +-1.5Vdc | @2.5Vdc reference |
| PWM Output | -0.1 to +0.1 max | arcdeg( 10%--90% @ 37Hz ) |
| Resolution | 0.2 arcsec | arcsec typical |
| Repeatability | 0.5 arcsec | arcsec typical |
| Linearity | <0.5% @ 0.1° | CCW & CW typical |
| Symmetry | <0.5% @ 0.1° | CCW & CW typical |
| Power | 32mA | @5Vdc supply |
| RS232 | 37Kbps-300,8.1,N | 19.2Kbs default |
| Temperature | -40 to +85 | deg C operational |
| Temperature | -55 to +125 | deg C storage |
| Probe | Diam 1.8" x 0.8" High MAX | polished disk, inches, 1 m cable |
Specifications and color of sensors may change without notice.
 |
ADVANCED ORIENTATION SYSTEMS, Inc. 2525 BRUNSWICK AVE, Suite 205 LINDEN, NJ 07036, USA. Phone: 908-474-9595 Fax: 908-474-9090 sales@aositilt.com http://www.aositilt.com |