EZ-TILT-1000 Dual Axis Conversion IC w/RS232 and EZ-TILT-1000 Evaluation board
The standard two degree of freedom single IC tilt module is built around a customized state of the art CMOS Microcontroller. The tiny SO18-SMD or DIP-18 customized IC is capable of providing continuous inclination information for dual axis tilt sensors in a standard RS-232 format with 8 bit resolution. An additional analog input on pin #17 is available for optional temperature or any other
environmental input used for monitoring or correction of the output. Unit communicates through “TERMINAL “ mode in Windows, or by utilizing custom software DX-232-A, which is provided at NO cost with each order. Single IC conversion module is perfectly suitable for large OEM markets such as VIRTUAL REALITY, TOYS, AUTOMOTIVE, COMPUTER, and CONSUMER
ELECTRONICS. The IC or the EVALUATION module is able to operate with any Dual axis Electrolytic tilt sensor.
It is available assembles and operates with the free demo software or via the
hyper terminal mode. It is perfectly suitable for visual demonstration of the
influence of viscosity and/or averaging on the response of the tilt module.
Special test confirms if a tilt sensor includes self test to confirm sensors presence on
POWER UP or RESET. The evaluation units is bult on 1.5 x 1.5 inch PCB, and
operates from a standard 9Vdc cell.
| Specification | Data | Description/units |
|---|---|---|
| RANGE | Sensor dependable | Arcdeg monotonous |
| SUPPLY | 5 | Vdc |
| RESOLUTION | 8 | bit |
| RESPONSE TIME | 20 mS | after request command |
| SENSING ELEMENT | Dual/Single axis | all sensors |
| CONSTRUCTION | so18 or DIP18 | surface mount ot DIP |
| TEMPERATURE | -40 to +85 | degC IC only |
| RS232 | 19200,8,N,1 | with 8Mhz crystal |
* Assembled kit of the demo board shown above in the photo is sold to be used with any PC in DOS or Windows.
# Based on standard non-modified electrolyte.
# Viscosity of the electrolyte may be modified to filter out vibration.
Specifications may change without notice.
 |
ADVANCED ORIENTATION SYSTEMS, Inc. 1901 E. LINDEN AVENUE, Unit 22 LINDEN, NJ 07036, USA. Phone: 908-474-9595 Fax: 908-474-9090 sales@aositilt.com http://www.aositilt.com |