EZ-TILT-3000-NULL / -L
ULTRA HIGH RESOLUTION NULLING SYSTEM
This special single axis NULLING ANALOG output tilt system is built around a customized state of the art CMOS SMT and Feed Through components. A 2" x 2" assembled PCB has a total height excluding the sensing element of 17mm maximum. Analog proportional to tilt DC voltage output provides continuous inclination information in one axis of tilt. This LOW cost module is perfectly suitable for numerous NULL SEARCH and HIGH precision leveling applications. Temperature value is available as a separate voltage output for external reference or other control options. If required, this module is capable of operating with any single or dual axis electrolytic tilt sensor. Module could be supplied calibrated and tested, with data stored in ASCII format on 3.5" disk.
| Parameter | Specification sx-003d-null (sx-003d-null-l) | Units/description |
|---|---|---|
| Range | -3 to +3 | arcdeg, monotonous |
| Range | -0.5 to +0.5 (-1.25 to +1.25) | arcdeg, near linear |
| Resolution | < 0.5 | arcsec, typical |
| Repeatability | < 0.0003 | arcdeg, typical |
| Linearity | < 5% @ 1° | CCW & CW |
| Symmetry | < 5% @ 1° | % , CCW & CW |
| Time constant | < 150 | msec ** # |
| Supply | 5 to 18 | Vdc , unipolar or bipolar |
| Current | 2 | mA @ 5 Vdc |
| Temperature | -55 to +125°C | deg C operational sensor only |
| Temperature | -40 to +85°C | deg C module |
| Temperature | -40 to +85°C | deg C storage |
| Construction | Flat mount | Advanced ceramics |
| Size | 1.5"L x 0.5"W x 0.25"H | sensor only ** |
** Based on standard non-modified electrolyte.
** Viscosity of the electrolyte may be modified to filter out vibration.
Specifications of sensors may change without notice.
 |
ADVANCED ORIENTATION SYSTEMS, Inc. 1901 E. LINDEN AVENUE, Unit 22 LINDEN, NJ 07036, USA. Phone: 908-474-9595 Fax: 908-474-9090 sales@aositilt.com http://www.aositilt.com |