EZ-COMPASS, EZCOMPASS, EZ-COMPASS-3, ELECTRONIC COMPASS, TILT COMPENSATED MAGNETOMETER COMPASS with DUAL TILT AXIS SENSOR/OUTPUT w/RS232

EZ-COMPASS-DIVE / MAGNETOMETER

Submersible Tilt Compensated Compass / Linear Dual Axis Tilt System


High reliability submersible advanced pitch/roll compensated COMPASS / MAGNETOMETER system is built around a state of the art CMOS microcontroller utilizing AOSI's proprietary algorithm on a 2.5" x 2.5" or 2" x 2.5" assembled PCB with a total height including tilt sensing elements of less then an inch. 

Packaged in a marine grade black anodized cylindrical aluminum housing the unit outputs continuous heading, field, dual axis tilt and temperature data over the standard RS-232 interface at depth up to 3500 meters. The AZIMUTH is generated from a 3 axis semiconductor magnetometer with 12 bit ( 0.08 deg ) resolution. The LINEAR tilt information is available with 12 bit resolution and includes flash adjustable gain for up to +-70arcdeg. 

COMPASS/TILT module is perfectly suitable for numerous underwater navigation, research, training, construction, entertainment and other precision orientation, navigation and leveling applications. Bottom exterior surface is calibrated for accurate zero level 

The COMPASS is able to output heading information in NMEA-0183 and local LCD modes. Easy link via Hyper Terminal Windows accessory facilitates custom calibration, hard/soft iron compensation, data acquisition, data averaging, and data display. For applications requiring custom tilt range, the compass can be supplied with any AOSI's single axis tilt sensors.


Parameter SpecificationUnits/description
Azimuth Range0--360deg, continuous
Azimuth Resolution 12 (0.08)bit (deg)
Azimuth Repeatability< 0.25deg, typical
Azimuth Accuracy< 1deg, typical
Magnetic Field+-2Gauss typical
Magnetic Resolution< 1mGauss typical
Pitch Range+70 to -70arcdeg linear
Roll Range+70 to -70arcdeg linear
Pitch Range+80 to -80arcdeg near-linear
Roll Range+80 to -80arcdeg near-linear
Tilt Resolution12bit full scale, both axis
Tilt Repeatability<2; bits
Operational depth3500meters
Temperature-40 to +80deg C
Storage Temp.-50 to +95deg C 
Communication 300--38400 baud,8,N,1 RS-232 standard
Supply 8 to 18 Vdc, 12Vdc typical
Size2.5"L x 2.5"W x 1.0"HPCB Board
NMEA-0183 mode5 sentences must use CR LF
Viscosity of the electrolyte may be modified to filter out vibration.
SOFT NORTH: North direction could be manually reset by software to compensate for local declination angle. 

Unit is available with 5Vdc supply.


Specifications of sensors may change without notice.


ADVANCED ORIENTATION SYSTEMS, Inc.
2525 BRUNSWICK AVE, Suite 205
LINDEN, NJ 07036, USA.
Phone: 908-474-9595
Fax: 908-474-9090
sales@aositilt.com
http://www.aositilt.com