EZ-TILT-3000-10 / EZ-TILT-3000-15 / EZ-TILT-3000-30 / EZ-TILT-3000-60 / EZ-TILT-3000-70
ANALOG Linear Single Axis Tilt Systems
This special single axis LINEAR Analog Vdc output tilt module is
built around a customized state of the art CMOS components. A 2"x 2"
assembled PCB provides
continuous inclination information in one axis of tilt. This LOW cost
module is perfectly suitable for numerous leveling applications. The
module utilizes
SX-010D-LIN or SX-015D-LIN or SX-030D-LIN or SX-060D-LIN or SX-070D-LIN
single axis LINEAR inclination sensor and provides an economical and
reliable tilt sensing solution for applications requiring superior
Mid-Wide range LINEARITY, resolution, repeatability and symmetry.
Rugged hermetic construction and MIL-SPEC temperature range make it
perfectly suitable for numerous Mid-Wide range high precision OEM,
military, medical, optical, automotive, range finder, alignment,
automation, robotics and construction angle measurement applications.
Innovative design, four set screw holes and small size facilitate
uncomplicated wall mounting. Sensor could be remotely located if so
required. Sensors size is 0.85"x0.75"x0.2". Exceptionally stable and
consistent performance in temperature variable environment. Electrolyte
may be modified to filter out errors induced by shock &
vibration. Test data could be supplied on 3.5" disk upon special
request.
| Specification | EZ-TILT-3000-10 | EZ-TILT-3000-15 | EZ-TILT-3000-30 | EZ-TILT-3000-60 | EZ-TILT-3000-70 | Comments/Units |
|---|---|---|---|---|---|---|
| Range | -11 to +11 | -25 to +25 | -45 to +45 | -70 to +70 | -80 to +80 | arcdeg monotonous max |
| Range | -10 to +10 | -15 to +15 | -30 to +30 | -60 to +60 | -70 to 70 | arcdeg linear |
| Resolution | <3 | <7 | <7 | <20 | <10 | arcsec |
| Repeatability | <0.005 | <0.02 | <0.02 | <0.03 | <0.03 | arcdeg typical |
| Linearity | <0.10 @ 10° | <0.5% @ 15° | <1% @ 30° | <4% @ 60° | <3% @ 70° | CCW & CW |
| Linearity | <0.050 @ 5° | <0.25% @ 5° | <0.5% @ 15° | <3% @ 45° | <2% @ 45° | CCW & CW |
| Linearity | <0.0050 @ 0.5° | <1% @ 15° | <2% @ 30° | <2% @ 30° | <3% @ 70° | CCW & CW |
| Response time | <60 msec | <60 msec | <60 msec | <60 msec | <60 | msec * # |
| Time constant | <170 msec | <170 msec | <170 msec | <170 msec | <170 msec | msec ** # |
| Tot. settling time | <320 msec | <320 msec | <320 msec | <320 msec | <320 | msec *** # |
| Temperature | -55 to +125 | -55 to +125 | -55 to +125 | -55 to +125 | -55 to +125 | deg C operational ## |
| Temperature | -55 to +125 | -55 to +125 | -55 to +125 | -55 to +125 | -55 to +125 | deg C storage ## |
* Elapsed time until the sensor reacts to a tilt disturbance.
** Elapsed time from the end of disturbance until the sensor is within
90% of its final output.
*** Elapsed time from the end of disturbance until the sensor is at
STEADY STATE output.
# Based on standard non-modified electrolyte.
# Viscosity of the electrolyte may be modified to filter out vibration.
##Temperature
for sensor ONLY.
ALL DATA OBTAINED WITH EZ-TILT-3000 ANGLE CONVERSION MODULE
Specifications and color of sensors may change without notice.
 |
ADVANCED ORIENTATION SYSTEMS, Inc. 2525 BRUNSWICK AVE, Suite 205 LINDEN, NJ 07036, USA. Phone: 908-474-9595 Fax: 908-474-9090 sales@aositilt.com http://www.aositilt.com |