EZ-TILT-2000-10 / EZ-TILT-2000-15 / EZ-TILT-2000-30 / EZ-TILT-2000-60 / EZ-TILT-2000-70 Rev-2 RS232/Analog/PWM outputs Linear Single Axis Tilt Systems
EZ-TILT-2000 rev-2 advanced programmable dual/single axis LINEAR Analog/Digital output tilt module is built around a customized state of the art CMOS Microprocessor. A 2"x 2" assembled PCB provides concurrent Analog, PWM and RS-232 inclination information up to two axis of tilt.
The module is fully temperature compensated for NULL and GAIN. The system includes full range linearity correction for each axis of tile and two software adjustable threshold detectors. In this configuration the module utilizes SX type (SX-010D-LIN or SX-015D-LIN or SX-030D-LIN or SX-060D-LIN or SX-070D-LIN) single axis LINEAR inclination sensors for single axis mode and provides an economical and reliable tilt sensing solution for applications requiring superior Nulling capabilities with concurrent excellent Mid-Wide range LINEARITY, resolution, repeatability and symmetry.
Rugged construction make these sensors perfectly suitable for numerous high precision OEM, military, medical, optical, automotive, range finder, alignment, automation, robotics and construction angle measurement applications. EZ-TILT-2000 rev-2 also includes two fully programmable level threshold detector lines what allow the user to set level sensitive alarms for pitch and roll. Innovative design, four mounting holes and small size facilitate uncomplicated mounting. For hazardous applications tilt sensors could be remotely located. Both Analog and PWM outputs are fully software programmable and are updated each read cycle for each enabled axis. The analog output range is top limited by 4Vdc and bottom limited by 1Vdc for the full set angular range. The PWM will output 10% to 90% duty cycle for the set angular range at base frequency of 37Hz.
Exceptionally stable and consistent performance in temperature variable environments and it's LOW cost make EZ-TILT-2000 rev-2 the perfect choice for high accuracy leveling applications. In addition to digital filtering the electrolyte may be modified to mechanically filter out errors induced by shock & vibration. Test data could be supplied on 3.5" disk upon special request.
Module is able to operate in a stand-alone mode with a 4 line x 20 character serial LCD display. The wide range model could operate to +-90 arcdeg covering a total span of 180 arcdeg. Module may also be available on 0.9" x 3.0" PCB for angle measurement in bore hole, tunneling, logging and oil drilling applications.
The system includes software adjustable temperature correction coefficients. The user has an option of changing temperature correction coefficients to actively remove NULL and GAIN drift due to continuously changing thermal conditions.
.
| Specification | EZ-TILT-2000-10 | EZ-TILT-2000-15 | EZ-TILT-2000-30 | EZ-TILT-2000-60 | EZ-TILT-2000-70 | Comments/Units |
|---|---|---|---|---|---|---|
| Range | -11 to +11 | -20 to +20 | -40 to +40 | -70 to +70 | -80 to +80 | arcdeg max |
| -10 to +10 max | -15 to +15 | -30 to +30 | -60 to +60 | -70 to +70 | arcdeg lin | |
| Resolution | 12 | 12 | 12 | 12 | 12 | bit |
| Repeatability | 2 | 2 | 2 | 3 | 2 | bit typical |
| Linearity | <0.1 @50 | <0.2% @ 15° | <1% @ 30° | <3% @ 60° | <3% @ 70° | CCW & CW |
| Linearity | 12 | <0.2% @ 10° | <0.5% @ 15° | <2% @ 45° | <2% @ 45° | CCW & CW |
| Symmetry | <1% @ 10° | <2% @ 15° | <2% @ 30° | <3% @ 60° | <3% @ 70° | CCW & CW |
| Response time | <60msec | <60 msec | <60 msec | <60 | <60 | msec * # |
| Time constant | <170msec | <170 msec | <170 msec | <170 msec | <170 msec | msec ** # |
| Tot. settling time | <320msec | <320 msec | <320 msec | <320 | <320 | msec *** # |
| Temperature | -30 to +85 | -30 to +85 | -30 to +85 | -30 to +85 | -30 to +85 | deg C operational |
| Temperature | -55 to +125 | -55 to +125 | -55 to +125 | -55 to +125 | -55 to +125 | deg C storage |
| Sensor Construction | ceramic | ceramic | ceramic | ceramic | ceramic | Consistently molded LIN type |
| Power | 6 to 12 Vdc | 6 to 12 Vdc | 6 to 12 Vdc | 6 to 12 Vdc | 6 to 12 Vdc |
* Elapsed time until the sensor reacts to a tilt disturbance.
** Elapsed time from the end of disturbance until the sensor is within 90% of its final output.
*** Elapsed time from the end of disturbance until the sensor is at STEADY STATE output.
# Based on standard non-modified electrolyte.
# Viscosity of the electrolyte may be modified to filter out vibration.
ALL DATA OBTAINED WITH EZ-TILT-2000-Rev2 ANGLE CONVERSION MODULE
Specifications and color of sensors may change without notice.
 |
ADVANCED ORIENTATION SYSTEMS, Inc. 1901 E. LINDEN AVENUE, Unit 22 LINDEN, NJ 07036, USA. Phone: 908-474-9595 Fax: 908-474-9090 sales@aositilt.com http://www.aositilt.com |