EZ-PROBE-3AV
Vertical Tilt Compensated Compass / Linear Dual Axis Tilt System
Low cost VERTICAL SOLID STATE advanced Pitch / Roll / Temperature compensated COMPASS / MAGNETOMETER system is built around a state of the art CMOS microcontroller utilizing AOSI's proprietary algorithm on a 0.9"DIAM x 6" assembled PCB and sealed in a 1" diameter x 7.6" long tubular enclosure with integrated bulkhead connector.
The COMPASS PROBE outputs continuous heading, magnetic field, dual axis tilt and temperature data over the standard RS-232 and RS-422 and RS-485* interfaces. The AZIMUTH is generated from a 3 axis semiconductor magnetometer with 12 bit ( 0.08 deg ) resolution. The LINEAR tilt information is available with 12 bit resolution for over +-90arcdeg. COMPASS/TILT probe is perfectly suitable for logging, bore hole profiling, antenna orientation, numerous navigation, research, training, construction, entertainment and other precision orientation, navigation and leveling applications.
The COMPASS PROBE is able to output multi-sensor information in NMEA-0183 mode and responds to numerous generally used commands. Easy link through the Hyper Terminal Windows accessory facilitates custom calibration, hard iron compensation, data acquisition, data averaging, scan delay, dumping factor and data display. Probe is supplied with a mating 6 foot cable, demo software, manual and calibration fixture.
,
| Parameter | Specification | Units/description |
|---|---|---|
| Azimuth Range | 0--360 | deg, continuous |
| Azimuth Resolution | 12 (0.08) | bit (deg) |
| Azimuth Repeatability | < 0.25 | deg, typical horizontal |
| Azimuth Accuracy | < 0.5 | deg, typical horizontal |
| Magnetic Field | +-2 | Gauss typical |
| Magnetic Resolution | < 1 | mGauss typical |
| Pitch Range | +90 to -90 | arcdeg linear after correction |
| Roll Range | +90 to -90 | arcdeg linear after correction |
| Weight | 200 | gramms nominal |
| Dynamic Range | 10 | reading/sec |
| Tilt Resolution | 12 | bit full scale, both axis |
| Tilt Repeatability | <2 | bits |
| Temperature | -40 to +85 | deg C |
| Communication | 1200--38400 baud,8,N,1 | RS-232 and RS-422 standards |
| Supply | 6---15 | Vdc |
| Size | 1.0": diam x 7.6"L | sealed probe |
| NMEA-0183 mode | 5 select modes | 1999 Revision |
* RS-485 is activated upon special request
SOFT NORTH: North direction could be manually reset by software to compensate for local declination angle
CABLE: Custom size cables are available upon request. Unit should be locally
calibrated.
Specifications of sensors may change without notice.
 |
ADVANCED ORIENTATION SYSTEMS, Inc. 2525 Brunswick Ave, Suite 205 LINDEN, NJ 07036, USA. Phone: 908-474-9595 Fax: 908-474-9090 sales@aositilt.com http://www.aositilt.com |