SX-030D-LIN / SX-070D-LIN LINEAR TILT SENSORS electrolytic inclinometers and angle detection inclination systems

SX-070D-LIN / SX-030D-LIN / SX-015D-LIN LINEAR Tilt Sensors

SX-070D-LIN, SX-030D-LIN and SX-015D-LIN are single axis LINEAR ceramics based electrolytic tilt sensors provide economical and reliable single axis tilt solutions for applications where very good linearity, high resolution and superior symmetry are required. Rugged construction and MIL-SPEC wide temperature range make these sensors suitable for numerous military, automotive, industrial, construction, wheel alignment, laser, medical, virtual reality and robotics applications. Low profile and flat reference surface facilitate simple vertical installation and utilization.

Specification SX-070D-LIN SX-030D-LIN SX-015D-LIN Comments/Units
Range -80 to +80 -35 to +35 -18 to +18 arcdeg near-linear;
Range -70 to +70 -30 to +30 -15 to +15 arcdeg lin;
Resolution <10 <7 <7 arcsec typical
Repeatability <0.02 <0.01 <0.01 arcdeg typical
Linearity <3% @ 70° <1% @ 30° <0.5% @ 15° CCW & CW
Linearity <2% @ 45° <0.5% @ 15° <0.25% @ 7° CCW & CW
Linearity <1% @ 30° <0.25% @ 7° <0.2% @ 5° CCW & CW
Symmetry <3% @ 70° <2% @ 30° <2% @ 15° CCW & CW
Response time <40 msec <40 <40 msec * #
Time constant <150 msec <150 msec <150 msec msec ** #
Tot. settling time <300 msec <300 msec <300 msec msec *** #
Temperature -55 to +125 -55 to +125 -55 to +125 deg C operational
Temperature -55 to +125 -55 to +125 -55 to +125 deg C storage
Construction ceramic ceramic ceramic Hermetic
Size 0.750"w x 0.850h x 0.200 0.750"w x 0.850h x 0.200 0.750"w x 0.850h x 0.200

Specification	SX-070D-LIN	SX-030D-LIN	SX-015D-LIN	Comments/Units
Range	-80 to +80	-35 to +35	-18 to +18	arcdeg near-linear;
Range	-70 to +70	-30 to +30	-15 to +15	arcdeg lin;
Resolution	<10	<7	<7	arcsec typical
Repeatability	<0.02	<0.01	<0.01	arcdeg typical
Linearity	<3% @ 70°	<1% @ 30°	<0.5% @ 15°	CCW & CW
Linearity	<2% @ 45°	<0.5% @ 15°	<0.25% @ 7°	CCW & CW
Linearity	<1% @ 30°	<0.25% @ 7°	<0.2% @ 5°	CCW & CW
Symmetry	<3% @ 70°	<2% @ 30°	<2% @ 15°	CCW & CW
Response time	<40 msec	<40	<40	msec * #
Time constant	<150 msec	<150 msec	<150 msec	msec ** #
Tot. settling time	<300 msec	<300 msec	<300 msec	msec *** #
Temperature	-55 to +125	-55 to +125	-55 to +125	deg C operational
Temperature	-55 to +125	-55 to +125	-55 to +125	deg C storage
Construction	ceramic	ceramic	ceramic	Hermetic
Size	0.750"w x 0.850h x 0.200	0.750"w x 0.850h x 0.200	0.750"w x 0.850h x 0.200

* Elapsed time until the sensor reacts to a tilt disturbance.
** Elapsed time from the end of disturbance until the sensor is within 90% of its final output.
*** Elapsed time from the end of disturbance until the sensor is at STEADY STATE output.
# Based on standard non-modified electrolyte.
# Viscosity of the electrolyte may be modified to filter out vibration.

ALL DATA OBTAINED WITH EZ-TILT-3000 ANGLE CONVERSION MODULE

Specifications and color of sensors may change without notice.

ADVANCED ORIENTATION SYSTEMS, Inc.
1901 E. LINDEN AVENUE, Unit 22
LINDEN, NJ 07036, USA.
Phone: 908-474-9595
Fax: 908-474-9090
sales@aositilt.com
http://www.aositilt.com